@droftarts Thank you.

I'm using Mozilla Firefox as my internet browser, and these icons don't appear for me. I tried on my phone as well, but they still don't show up. What could be the reason? @droftarts

@jay_s_uk Thank you for your response and for confirming the compatibility of the Duet image with Raspberry Pi 5. I appreciate your help!

@droftarts It's not a browser-related issue. I tried it on Google Chrome as well, and it doesn't work there either.

How can I change my profile picture and banner?

@jay_s_uk

Don’t I need to use a CAN connection for the Scanning Z Probe?

Currently, I’m using the CAN port on the Duet 3 6HC to connect with the Duet 3 3HC expansion board.
Is there any additional CAN port available on the Duet 3 6HC? I couldn’t find one.
If there are any recommended ports I can use for the Scanning Z Probe, could you please let me know which ones you suggest?

Thanks in advance!

@jay_s_uk thanks

Which connection do you recommend for the Scanning Z Probe?
On which board and port should I connect the Z Probe?

In the configuration tool, when I select the probe type, I can’t see an option to choose the specific port for the Z Probe. Could you please clarify how to define the correct connection?

Hi everyone,

I'm using a Duet 3 6HC mainboard along with a Duet 3 3HC expansion board, and I'm planning to use a Scanning Z Probe.

1. Should I connect the Scanning Z Probe to the 3HC expansion board, or is it better to connect it directly to the 6HC mainboard?

2. Is the Scanning Z Probe alone sufficient, or do I also need to use a separate Z endstop?

3. The print surface consists of an aluminum bed with a non-metallic build sheet on top (it’s a paper-like material around 0.1 to 0.5 mm thick). Will the Scanning Z Probe still be able to take accurate measurements through this surface?

Thanks in advance!

@jay_s_uk Thank you for your response and for confirming the compatibility of the Duet image with Raspberry Pi 5. I appreciate your help!

Is the Duet image file compatible with Raspberry Pi 5? The DuetPi image file does not appear in the Raspberry Pi Imager program. What could be the reason for this?

@dc42 Thank you very much for taking me into consideration and responding. We decided to use a different method. Thank you again for your answers.

@elmoret Thank you!

help please +++

@droftarts Thank you anyway. But I'm waiting for their help. I have no other option.

@droftarts I can't adjust the height of the section highlighted in blue. Could you help me with this? I've been looking into it myself but haven't found a solution. I don't want it to take too long.