Posts made by RJUNIOR2003

Thank you dc42,

That worked perfectly!
I understand the composition of the code now with your example.

I have an Automatic tool brush that needs the Z position to be greater than 75mm to clear the Brush motion.
but once the print height is greater than 75mm tall, than it can simply deploy the arm without any Z movement.

here is what I'm trying to create.
If the Z position is <=75 than,
G90
G1 Z75 F1000 ;move z bed for clearance
G1 B65 F4000 ; deploy tool brush

Else,
G1 B65 F4000 ;deply tool brush

I've looked at the wiki but so far my attempts to make this work have been unsuccessful.
can someone point me in the right direction?