Posts made by Richard F

@Charlie Thanks

@T3P3Tony ikr

Patent pending
A bit of Friday night fun for you

@droftarts thanks IAN , i will look at that "duet doc " Me having dyslexia , it's hard to take in information from text . But i will try my best

@Charlie would a mouse optical sensor work to monitor filament

do we need more than this for a run out trigger

@tas thanks Tas . i will give that a go and fine tune later

Sorry everyone , i have 2 threads open . but i only come on here when ive been trying myself to figure out for hours

it seems there are lots of offset options

its a hall , ( metal bed detect probe ) . im also using it as the home z endstop .

its about 2mm up from nozzle

so i dont know what is the best M-code to use . i carnt seem to get a good offest without the point data flying off the grid..
either way , high or low

M106 P1 S230 ; Turn on fan 0 at full speed






M307 H0 R2.430 K0.560:0.000 D5.50 E1.35 S1.00 B0 V0.0
M307 H1 R0.130 K0.150:0.000 D10.00 E1.35 S1.00 B1



M558 K0 P8 C"20.io0.in" H2 F200000 T1000                        ; configure metal proximity sensor via slot #0
G31 P500 X20 Y-20 Z5   
M851 Z3.1 ; Set Z probe offset       .. 





M109 S0 T0 


M593 F40  ; impit shaper , F= HZ 





; Z probe parameters
;G31 K0 P500 X20.0 Y-15.0 Z3


;G10 P0 L20 X0 Y0 Z10.1     ; HIGHER = DOWN . LOW = UP 

@droftarts said in Input shaping . can i just run a auto tune ?:

@Richard-F Once you have followed the advice from @oliof and @gloomyandy, you can test the input shaping with a print. See the 'Klipper version' section here: https://docs.duet3d.com/en/How_to_guides/Calibration#input-shaping

Download the 'ringing tower' from the Klipper page. The first macro is for printing at different accelerations to show the ringing, so shouldn't be needed if you already know the frequency from the accelerometer. The second macro applies the different input shapers, to see the effect.

Ian
thanks IAN will do I'm just making my own build so i just need a basic set up at the moment and fine tune later , but that will be useful when i do

@oliof Thank you so much for your time , i think i have a basic understanding , I'm setting up a new build so I'm working out many different things as i go

but i think this is right . i hope lol

@Richard-F
would it be M593 F40 ? .
configure / apply on the right of the tick boxes , I've no idea what thats doing . lol
.I've tried looking for video tutorial , me being neurodivergent ,a video is the best way for me to understand

Hi
I've just fitted the tool board to hot end , so i only have one accelerometer on the x-axis
but i have no idea what all these input shapers click boxes do , i just want a basic set up .

So i don't know what box to click on on the right-hand side

any help would be great , thanks

@o_lampe thanks

@MJLew said in Extruder Concept . AM i mad:

"Proper Printing"

i just watched the vid , wow he put a lot of work into it , it was cool just seeing the proof of concept work , i guess I'm not mad lol . But it made my post useless now.

@Richard-F But i know what the 3d market needs is cheap affordable servo drives , i know there is "0-drive "
but an add-on for duet would sell like hot cakes

@jay_s_uk thanks

@oliof just an idea , ill have to watch those videos , i guess an idea is better than none

@o_lampe you could add a plate and spring to keep things even . i just didn't go mad with the design as i didn't know it had been tried before but a good obversion

using gt2 belts to feed filament , like a tank track it has more traction , I'm not sure if someone has already tried this
just an idea

You can close thread now if you like

@Richard-F for future problems , i fixed it by turning these off

@Richard-F
Ive still no idea why its not letting me set custom bed temps though , everything's just been updated to the latest fw