Posts made by pr02type

@droftarts
=== Diagnostics ===
RepRapFirmware for Duet 2 WiFi/Ethernet version 3.6.0-beta.3 (2025-01-16 19:09:12) running on Duet WiFi 1.02 or later + DueX5
Board ID: 08DGM-917NK-F23T0-6JKDJ-3S06N-TWA0D
Used output buffers: 1 of 26 (3 max)
Error in macro line 7 while starting up: in file macro line 7: M540: invalid MAC address
=== RTOS ===
Static ram: 23520
Dynamic ram: 68412 of which 40 recycled
Never used RAM 28024, free system stack 184 words
Tasks: NETWORK(1,ready,6.9%,378) HEAT(3,nWait 5,0.0%,308) Move(4,nWait 5,0.0%,361) DUEX(5,nWait 5,0.0%,23) MAIN(1,running,91.3%,758) IDLE(0,ready,1.8%,29), total 100.0%
Owned mutexes: USB(MAIN)
=== Platform ===
Last reset 00:00:41 ago, cause: power up
Last software reset details not available
Error status: 0x00
Aux0 errors 0,0,0
MCU temperature: min 20.3, current 24.3, max 24.5
Supply voltage: min 0.0, current 1.7, max 1.9, under voltage events: 0, over voltage events: 0, power good: no
Heap OK, handles allocated/used 99/4, heap memory allocated/used/recyclable 2048/84/0, gc cycles 0
Events: 2 queued, 2 completed
Date/time: 1970-01-01 00:00:00
Slowest loop: 3.55ms; fastest: 0.14ms
I2C nak errors 0, send timeouts 0, receive timeouts 0, finishTimeouts 0, resets 0
=== Storage ===
Free file entries: 10
SD card 0 detected, interface speed: 20.0MBytes/sec
SD card longest read time 0.8ms, write time 0.0ms, max retries 0
=== Move ===
Segments created 0, maxWait 0ms, bed comp in use: none, height map offset 0.000, hiccups added 0/0 (0.00ms), max steps late 0, ebfmin 0.00, ebfmax 0.00
Pos req/act/dcf: 0.00/0/0.00 0.00/0/0.00 0.00/0/0.00
no step interrupt scheduled
Driver 0: ok, SG min n/a
Driver 1: ok, SG min n/a
Driver 2: ok, SG min n/a
Driver 3: ok, SG min n/a
Driver 4: ok, SG min n/a
Driver 5: ok, SG min n/a
Driver 6: ok, SG min n/a
Driver 7: ok, SG min n/a
Driver 8: ok, SG min n/a
Driver 9: ok, SG min n/a
Driver 10:
Driver 11:
=== DDARing 0 ===
Scheduled moves 0, completed 0, LaErrors 0, Underruns [0, 0, 0]
Segments left 0
Code queue is empty
=== Heat ===
Bed heaters 0 -1 -1 -1, chamber heaters -1 -1 -1 -1, ordering errs 0
=== GCodes ===
Movement locks held by null
HTTP is idle in state(s) 0
Telnet is idle in state(s) 0
File is idle in state(s) 0
USB is ready with "m122" in state(s) 0
Aux is idle in state(s) 0
Trigger is idle in state(s) 0
Queue is idle in state(s) 0
LCD is idle in state(s) 0
Daemon is idle in state(s) 0
Autopause is idle in state(s) 0
=== DueX ===
Read count 1, 1.45 reads/min
=== Network ===
Slowest loop: 100.00ms; fastest: 0.00ms
Responder states: HTTP(0) HTTP(0) HTTP(0) FTP(0) Telnet(0)
HTTP sessions: 0 of 8
=== WiFi ===
Interface state: disabled
Module is disabled
Failed messages: pending 0, notrdy 0, noresp 4
Socket states: 0 0 0 0 0 0 0 0
ok

@jay_s_uk Oh, I may have worded things wrong.
I am able to update wifi module firmware with m997 s1.
I put the file in the firmware folder.

It will connect, erase, upload 5%-20% 50% etc.... 100% Completed

I have tried with the wifimodule .bin files from multiple release versions, hoping maybe I was using the wrong one, none of them seem to fix the issue.

I hate posting questions but unfortunately feel I must ask for help.

Duet2 V1.04a - For years I was running on old firmware 2.03, I decided to update it to 3.5.4, going though the recommended method stepping up versions 2.0 to 3.0 until 3.5.4.
It seemed to go fine except I cant get the wifi working no mater what I try.

Error: Failed to initialize WiFi module: SPI Timeout

I tried updating the wifi module version .BIN from multiple versions In case I somehow had the wrong one, still no change.

Just now I tried updating everything to the beta 3.6.0, to see if that would solve anything, still same problem.