Topics created by piranha32

@piranha32 said in Non-pwm cooling fan control:

I'm planning to build the pump controller

if thats the case then it would be the least effort to build one that accepted PWM signal duty cycle to indicate requested speed.

@piranha32 said in My Duet2WiFi stopped responding:

I'm worried that it may happen again when the board will be installed in the printer, so I'd like to understand what's happened, and protect against it.

first reported case (afaik), and turn off the power when working on it as well as don't work on it without a proper ground strap to ground youself about summs it up i rekon.