@dc42 Thanks mate, will try to source the chips and repair.

@dc42 All of the driver outputs do provide 5 volt.

@dc42 Thanks, I kinda did a quick continuity measurement today but not on voltage on the pins. I will measure and verify tomorrow if that is it.

Duet 3 6XD

What is most likely to be broken when one accidentally shorts the 5v pin to a en-neg pin?

This might have happened on the driver2 output.

No longer working is driver2, 3, 4 and 5.

Still working are driver 0 and 1 and as far as I know all other printer functions.