@ozi said in Probe points with bltouch:
And my second problem is, I have 2 part cooling fans (connected to fan2 and fan1), how can start them together?
In your tool definition you would need F1:2 instead of just F1. However, it's best to have Fan1 as the hotend heatsink fan, and use Fan0 and Fan2 for your part cooling fans. This is because Fan1 will turn on automatically at boot briefly which is useful in the case of a power cycle while the hotend is hot to help prevent a clog. In that case, the tool definition would have F0:2
Post your fan and tool config if you need more help.