Posts made by oolyk

@Phaedrux

thanks to all

@gloomyandy
looks like the right place to start. will try.
thanks

@Herve_Smith

unzip, copy paste everything into the sd card? under "firmware" or where?

I built a delta printer and had it working flawlessly for couple of years. then I lost the dwc and the communication with the paneldue. more or less abandoned it but now returned, modified the wifi to ethernet, but can't get the dwc to work.

@Herve_Smith
thanks
I have no access to the dwc. but do you mean that the software can deal with the zip file, meaning that I can load the zip file into the card?

when placing dwc firmware in an sd card, do I need to unzip the file? and if so, which unzipped parts need to go in? also, paneldue responds "files on card 0". how to solve?

thanks

@T3P3Tony thanks

@T3P3Tony thanks! so once the wifi module is removed, the ethernet can be soldered in the newly exposed headers?
have you yourself done it?

having no luck connecting to my duet 2 wifi, I bought duet ethernet module and just received it. the headers in the module are different pitch and number, so an adaptor is needed. is there an available adaptor? or if not what is the connection diagram from the module to the removed wifi soldering holes?

@jay_s_uk I just thought about something. I loaded the firmware with bossa. it has couple of internal settings and one of them is "lock". they recommend locking and I did.
so now i will start all over again and try without locking.

@jay_s_uk this is micro sd and it does not any lock in it so it must be in the pc, but as I said I could not unlock it.

here is a copy of my last working config:
https://drive.google.com/file/d/1j4c8mMl5Ldy47qrH7TA3_doUThTSzMDt/view?usp=sharing

how to load it into my duet2 board when i cant connect to it? sd card thru usb to pc is locked and not changeable (tried to unlock it in the pc, did not work)

I can do bossa but which files I use for it?

https://docs.google.com/document/d/1Bdd7taF6CYyKC1IcAW1qdQgT3Mw4bWTz/edit?usp=sharing&ouid=103516884958399788064&rtpof=true&sd=true

this is the config.g from the firmware I had newly downloaded and is completely wrong for me. connected to pc thru usb, I cannot change anything in it or replace the entire file.

by the way, the paneldue is active but would not connect.

@Phaedrux
yes. I have a separate 2.4 network.

another hint: after months of dead paneldue, I managed to fix the problem (firmware) and it now works. yet the paneldue cannot connect to the duet board. does that help in understanding what is the source of the problem?
is it possible that completely wrong config.g blocks connection? and if so, how can I access the config.g while I cannot talk to the board?

thank you for your patience.

@Phaedrux and Jay, thanks but so far nothing worked. extracted the dwc to the sd card, did not help.

a stupid question: is it possible that a full firmware {latest) for duet2 wifi , including everything necessary, will be placed in a cloud so that simple copy paste into an sd card will work?

also, is there a way to change config.g thru yat? or with the bare sd card thru usb in the pc?

@Phaedrux : how do you update dwc on the sd card ?

Jay: 1. nothing loads at all when i try the ip address 2. how can I ping the duet?

@jay_s_uk - thanks.

I did not know how to attach yat results, so here is a link to my cloud copy of m122 file:
https://drive.google.com/file/d/1D7v9JxPmQ4dLjUtWh55y0Khf83Ro-7P1/view?usp=sharing
after clearing 588 as sugggested.

also, the newly installed firmware is: duet2 combined firmware.bin v 3.4.5
does it include wifi firmware? did not deal separately with wifi firmware

after several months of my delta not working, I am trying to revive it and so far no luck.

• duet 2 wifi
• re installed firmware
• can communicate by yat
• verified firmware
• was able to connect to wifi only thru hotpoint (all other wifi channels at home did not work)
• received name and ip address
• could not connect to said address because the board did not respond
• all leds are correctly lid, including wifi module
• diag led off but shortly lid when usb connected
• followed all items in "what to do when duet does not respond"

any ideas?

@phaedrux. thanks.
I am trying to follow "activate and connect......when it doesn't work"
I check the sd card in the computer and it has all the files, including SetNetwork. however, when I command m98P/macros/SetNetwork, it comes back with "could not find..." . tried other macros files with same results. how can I check the card thru YAT?

@dc42 , thanks.
I am totally stuck. my paneldue turned dead a year ago and I have since been using wifi dwc but now wifi disappeared as well. cannot manage to have the network being recognized.
what can I do under these conditions to find the problem of the paneldue ?

thanks.

I cannot connect to the wifi in my duet2 wifi. noticed moderator's remark:
"You can run the Duet via USB too if you want, but you will lose the power of the web interface"
kindly explain how. thanks!