Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login
    1. Home
    2. ockray83
    3. Topics
    • Profile
    • Following 0
    • Followers 0
    • Topics 2
    • Posts 21
    • Best 3
    • Controversial 0
    • Groups 0

    Topics created by ockray83

    • ockray83undefined

      Berd-Air - poor pwm response with ez switch

      Duet Hardware and wiring
      • • • ockray83
      13
      0
      Votes
      13
      Posts
      1.1k
      Views

      Phaedruxundefined

      @ockray83 said in Berd-Air - poor pwm response with ez switch:

      @fred-y
      It looks like the m950 command isn't supported by my board's current firmware (2.05.1). I haven't updated this thing in a long time. I'll have to go through the update and see how it does with the commands you've provided.

      If you still have access to DWC. Upload these 3 zip files, one at a time in the system tab. Don't extract them first. Reboot after each. Use M115 in the gcode console to verify the firmware has been applied.
      https://github.com/Duet3D/RepRapFirmware/releases/download/2.05.1/Duet2Firmware-2.05.1.zip
      https://github.com/Duet3D/RepRapFirmware/releases/download/3.0/Duet2and3Firmware-3.0.zip
      https://github.com/Duet3D/RepRapFirmware/releases/download/3.3/Duet2and3Firmware-3.3.zip
      That will get your firmware and DWC up to date.

      You can see the change logs here:
      https://github.com/Duet3D/RepRapFirmware/wiki/Changelog-RRF-3.x

      For your config, might be a good idea to run through the configurator tool and generate a fresh set for RRF3.
      https://configtool.reprapfirmware.org/Start

      Backup your existing config files in the sys folder in case you want to switch back to RRF2. It’s easy to switch back and forth, just upload the zip file for the version you want and then upload your config files.

      These documents will come in handy during the conversion.
      https://duet3d.dozuki.com/Wiki/RepRapFirmware_3_overview
      https://duet3d.dozuki.com/Wiki/Gcode

    • ockray83undefined

      Unsolved Duet Web Control 404 error

      Duet Web Control
      • • • ockray83
      26
      0
      Votes
      26
      Posts
      1.2k
      Views

      ockray83undefined

      It has been a couple of weeks since I moved the router closer to my printer. I am happy to say that after moving the router to within about a 6ft line of sight with my printer, I have been enjoying DWC undisturbed by constant dropouts, save for one instance today, which I believe I can attribute to mistakenly trying to upload a g-code file into the job list via Slicer while another print was in progress.

      I had enough confidence in the system's stability now that I invested in a smart effector & rods for the printer as well and I couldn't be happier with the result.

      Thank you to everyone that replied and helped out a new user struggling. When I get around to building a second printer, I know what board I'm putting in it.