Hello
it works on duet 2 wifi
thank you

it's good flash ok,
with PanelDue-v3-7.0E.bin,
everything is ok, he became himself again,
I had to stay press on erase I don't know?
I'm on windows,
  but its going to be useful to the people who follow and who are equip apple.
thank you
I can return following my project

c bon flashe ok ,
avec PanelDue-v3-7.0E.bin ,
tout est ok , il est redevenu lui meme ,
j'avais du rester apuyer sur erase je sais pas ?
je suis sous windows ,
mais sa va servir aux personnes qui suivent et qui sont equiper apple .
merci
je peux retourner a la suite de mon projet

Hello to everybody
well it's going well for now,
the most complicated for me will soon arrive
you gave me strength thank you

salut a vous
bon ça avance bien pour l'instant ,
le plus compliqué pour moi va bientôt arriver
vous m'avez donner la force merci

hi guys
thank you all for your help,
hunterbrighton I just saw your message and yesterday, coincidence I had already download your files to look at it more closely, and a big thank you to you for your sharing,
but these temp ci, my project is in slow motion, with the covid-19, run the store to recover the food that it can stay for the family the children, we are under military order tomorrow in France almost with compulsory confinement, me resident paris my outings will be very limited
but little by little the project its advance and at the same time I seek for the mirror mode its occupies us

(for information the covid-19 is not like a flu it is much more violent and more infectious take cough your precaution)

sorry I only speak French this is complicated,
thank you

yes exactly g code M701 M702 M703 I can't find M704

the link of material management:https://duet3d.dozuki.com/Wiki/Filaments

I will test the retractations.
but for the temperature c the PID setting, but that would it be possible? to adjust the printing temperature,

I'll look
thank you so much

Yes thanks
I just saw R3 for the rehome.g,
but does not work
I WILL LOOK WELL
THANK YOU

Hello
it works on duet 2 wifi
thank you

the printer has already moved?
is it an idex?

Hi
I looked for, and found that the printer can put itself on hold, with the nema motor stall alert,
I have a problem, with a wire cut or bad contact on the Y motor, a few days ago,
imagine the horror the next day,
es that this is possible to avoid horror :),
to have two securiter,
the first one ,
would put the printer on hold in the event of a motor connection problem and more,

the second ,
not a put on hold but a home X Y U in case of stall,
not at each layer its I do and will lose too much printing time, I think

thank you

salut
J'ai cherché, et j'ai trouvé que l'imprimante pouvait se mettre en attente, avec l'alerte de décrochage du moteur nema,
J'ai un problème, avec une coupure de fil ou un mauvais contact sur le moteur Y, il y a quelques jours,
imaginez l'horreur du lendemain,
es qu'il est possible d'éviter l'horreur :),
avoir deux securiter,
le premier ,
mettrait l'imprimante en attente en cas de problème de connexion moteur et plus,

la deuxième ,
pas une mise en attente mais une maison X Y U en cas de décrochage,
pas à chaque couche son je fais et perdrai trop de temps d'impression, je pense

Merci

Hi
here I am asking myself a question,
I looked everywhere without really finding it,
And I think it can help me and other people,
I print several kinds of materials from PLA to Nylon to PETG etc tec, and the same model also that I print in various materials,
so i would like to handle the retractation and see the pressure advance by the filaments loaded via duet (printer)

so if I load the PVA on the right and the NYLON on the left (I have an idex)
I would like the printer to change the retraction itself,
and also this, is of course possible? ,
the temperature (temperature of the first layer, the normal operating, standby, and bed temperature)
and
pressure advance,

I can enter these parameters (retractation) directly in config,
what I did for the advance of pressure,
but I do not see the interest for the retractation, as I often change c simpler in the slicer directly,
but I have to cut again for each material

thank you

salut
ici je me pose une question,
J'ai cherché partout sans vraiment le trouver,
Et je pense que cela peut m'aider moi et d'autres personnes,
J'imprime plusieurs types de matériaux du PLA au Nylon en passant par le PETG etc tec, et le même modèle aussi que j'imprime dans divers matériaux,
je voudrais donc gérer la rétraction et voir la pression avancer par les filaments chargés via duo (imprimante)

donc si je charge le PVA à droite et le NYLON à gauche (j'ai un idex)
Je voudrais que l'imprimante change la rétraction elle-même,
et aussi cela, est-ce bien sûr possible? ,
la température (température de la première couche, fonctionnement normal, veille et température du lit)
et
avance de pression,

Je peux saisir ces paramètres (rétractation) directement dans la config,
ce que j'ai fait pour l'avancée de la pression,
mais je ne vois pas l'intérêt pour la rétractation, comme je change souvent c plus simple dans le slicer directement,
mais je dois recouper pour chaque matière

Merci

Hi
dsl for my English I translate I speak French
I myself created an idex machine,
and, i found the fastest solution for me to work with, prusaslicer or cura, i have to create 3 machines, an idex, a copy, a mirror with different bed sizes
in the first I have, idex _ T0 T1
second copy_ T0 T1 deactivate T2 activate
third mirror _ T0 T1 T2 deactivate T3 activate

hi guys
thank you all for your help,
hunterbrighton I just saw your message and yesterday, coincidence I had already download your files to look at it more closely, and a big thank you to you for your sharing,
but these temp ci, my project is in slow motion, with the covid-19, run the store to recover the food that it can stay for the family the children, we are under military order tomorrow in France almost with compulsory confinement, me resident paris my outings will be very limited
but little by little the project its advance and at the same time I seek for the mirror mode its occupies us

(for information the covid-19 is not like a flu it is much more violent and more infectious take cough your precaution)

I advanced a little and start to see a little clearer but when I choose the tool U it controls the axis X and if asks for a g28 it is u which probes'
I have to delete g28 from the slicer I think ??

thank you timcurtis67
I look at your files a big thank you to you but I still have a problem with the z probe (bltouch),
why the chario U want to probe I don't understand,
there are parameters for bltouche probe force on X ??
  I am looking for little by little.
the temperature problem seems to be resolved with your settings
can be my tool change file or cura (I am doing my tests with cura)
thank you