@T3P3Tony so the first Duet 3 are fine ? Exited
Best posts made by mundsen
-
RE: Duet 3 Mainboard 6HC - initial production run.
-
RE: Duet 3 Tool Board
Designed and printed mount for the tool board on my core xy - wireing next!
-
RE: Duet 3 Mainboard 6HC - initial production run.
The new home for my Duet 3 + rpi4 + 7" LCD (design in progress)
-
RE: Duet 3 Mainboard 6HC - initial production run.
First initial test
Duet 3 6HC
Raspberry Pi 4 2GB
7 inch 1024x600 capacitive touch LCD
24V PSU
SD card that came with the DuetAll seems to work fine
Next, I`ll connect steppers, fans, configure WiFi/Ethernet.. -
RE: Duet 3 Mainboard 6HC - initial production run.
I got a question about duet 3 and pi - is the code transfered to the duet before the print Job starts or is it controlled real time by the pi during the print?
Latest posts made by mundsen
-
Duet 3 6HC v0.6 - add 5V PWM out?
Hi
Is it possible to mod this controller to get the same 5V PWM out as on the final 6HC controller?
-
RE: Duet 3 Tool Board
Designed and printed mount for the tool board on my core xy - wireing next!
-
RE: CAN cable for tool distribution board to tool board
Is something like this an alternative?
-
RE: Duet 3 Tool Board - Available?
My toolboard is on it`s way
Is the software ready for it?
My config:
e3d hemera 24V, but with 12V cooling fan
12V filament cooling fan
BLTouch probe -
RE: Going to build a laser engraver...
https://forum.lightburnsoftware.com/t/duet-controller-support/11976
Not full RRFW support yet? or is there news in the rrfw 3 that make it work with LightBurn?
-
RE: Going to build a laser engraver...
@dc42 reat So I can run my Duet 2 WiFi with the latest RRFW 3 in combination with LightBurn ?
I have a 5V PWM laser and plan to use one of the pwm outputs on the Duet 2 extension board
-
RE: Going to build a laser engraver...
I`m working on a laser where I did plan to use a Duet 2 WiFi
Is there a software like LOightBurn that is compatible with RRFW today?
Or Should I start with an simple grbl controller and wait for RRFW support in LightBurn? -
RE: Duet 2/3 for CNC vs other controllers
I have DM 856 drivers for the cnc buil!
FB_IMG_1582319371755.jpg -
Duet 2/3 for CNC vs other controllers
Hi
I have 3 project at the moment
- A Railcore inspired printer running Duet 3
- A small diode laser running duet 2 wifi
- A CNC Where I did plan to use a Pokeys57CNC controller + Mach4
My question is - should I use Duet 2/3 on my CNC?
What software?