Topics created by Mr_Phelps

@phaedrux
Sorry, too many irons in the fire...
Not sure about grounding on the EVA, so probably not. I'll have to look into that.

I've been running without issue on the second thermistor.

I'll try a quick look at the sense resistor the next time I have some spare cycles.

Thanks for the info!

@jay_s_uk Thanks! Looks like that worked. When the controller on my Prusa 2.5 finally died I swapped over to the Duet Mini 5+. Probably got the z connectors reversed by accident.

@phaedrux Running two printers of my Surface (other printer is a Prusa Mk 2.5S that I changed to Duet 5 Mini board.)
So I shut everything down. Power cycled the Surface. Open DWC and grabbed the file you linked (thanks for that) and ran the upgrade. This time it worked. Not sure if for some reason the web browser was the thing not letting the upgrade finish.

But now, with latest firmware, the plugin sees the accelerometer and it actually ran the routine.👍

So I think we are good to go. Thanks for all the help!😁