5mΩ is absolutely normal for a 15A ATC fuse. A fuse is by its nature a resistor.
Best posts made by Monkeh
-
RE: external inline fuse holder getting warmposted in Duet Hardware and wiring
-
RE: Crimping tool molex/ferrulesposted in Duet Hardware and wiring
They are very different types of connection. You can probably get die sets which would allow one handle to be used, but this is usually the more expensive option.
-
RE: CAN-FD cableposted in Duet Hardware and wiring
@Danal said in CAN-FD cable:
Preferred cables will be marketed with terms like "High Speed" or "ADSL" or both. This indicates a shielded cable. I used these: https://www.amazon.com/gp/product/B011SS7LYU/
Which is very visibly not at all a shielded cable. There is no point in it being - the connector has no shield, the system it is intended for use in has no shield... If a foil is presented inside there unterminated, it's at best useless, probably harmful..
Cabling required should be nothing more than a common two pair cable and 6P4C connectors.