@Phaedrux @dc42 First off thanks for the support and quick response! The exact fault I'm getting I'm getting is "Error: short to ground reported by driver(s) 4" I have updated the Firmware (thanks for explaining how to and the download) and tried a print, it started but about 10 seconds in it threw the error. I have switched the driver to spreadCycle from stealthChop, the machine did not like that, a few skipped steps during the purge and then it threw the same error after it started printing. The wiring is looking more and more to be the culprit. Of course my crimper and connectors are buried somewhere. Unless someone has something else I can try, I'll be swapping out the wiring once I get the ambition to do so... I'll keep you updated as soon as swap the wiring. Thanks!
