Best posts made by mikebridge

could we get a timescale added under the temperature chart in DWC?

is there a way to export a config.json from my current setup to import into the tool?

my google-fu is failing me (i can't find the specs & calculation), how much deflection (droop) do you get on that 12mm linear rail you're using unsupported for the X axis?

edit: actually, it appears you're using it as the Y-axis

here's my homez script for my coreXY w/ 2 Z drivers:

; homez.g
; called to home the Z axis
;
; generated by RepRapFirmware Configuration Tool on Sat Jan 06 2018 19:43:35 GMT-0600 (Central Standard Time)
G91 ; relative positioning
G1 Z5 F30000 S2 ; lift Z relative to current position
G90 ; absolute positioning
G1 X190 Y206 F30000 ; go to first probe point
G30 ; home Z by probing the bed
; Uncomment the following lines to lift Z after probing
G91 ; relative positioning
G1 Z5 F500 ; lift Z relative to current position
G90 ; absolute positioning

@exerqtor I'm wondering how well that filament path is going to handle flexible filaments. I can see getting a wad stuck between the 2 bearings opposing the toothed gear.