Posts made by MCRikki

@Phaedrux Replaced the SD Card and still having the same issue. Went with a Class 10 card. The weird part is that downloads are going at a normal speed (about 200kb/s). And when I try to push an upload to it, it starts around 150kb/s, and then just tanks down to about 12kb/s. It has a good connection to the access point, as the AP is right next to it.

@jay_s_uk I just ordered a new Class 10 SD Card today to see if that is the issue or not. Just figured I'd reach out here to see if anyone could see anything else wrong that I could try in the meantime.

We are experiencing very slow upload speeds whenever trying to push GCODE files through the web interface. I'm talking like 10-20kb/s. The device is in a corporate environment and is located about 10 feet from an access point and has a solid connection to the access point, yet we are getting terrible upload speeds. Any idea what is going on or any ideas of things I could try to remedy this problem?

Here is my M122 data:

=== Diagnostics ===
RepRapFirmware for Duet 2 WiFi/Ethernet version 3.3 (2021-06-15 21:44:54) running on Duet WiFi 1.02 or later
Board ID: 0JD0M-9P6B2-NJ4S8-6J1F8-3SD6S-TV7AM
Used output buffers: 3 of 24 (24 max)
=== RTOS ===
Static ram: 23876
Dynamic ram: 75536 of which 0 recycled
Never used RAM 15004, free system stack 170 words
Tasks: NETWORK(ready,13.2%,217) HEAT(delaying,0.0%,330) Move(notifyWait,0.1%,364) MAIN(running,86.7%,441) IDLE(ready,0.0%,29), total 100.0%
Owned mutexes: WiFi(NETWORK)
=== Platform ===
Last reset 01:08:54 ago, cause: power up
Last software reset at 2022-11-11 09:28, reason: User, GCodes spinning, available RAM 14588, slot 0
Software reset code 0x0003 HFSR 0x00000000 CFSR 0x00000000 ICSR 0x0041f000 BFAR 0xe000ed38 SP 0x00000000 Task MAIN Freestk 0 n/a
Error status: 0x04
Aux0 errors 0,0,0
Step timer max interval 0
MCU temperature: min 20.1, current 21.0, max 21.4
Supply voltage: min 23.9, current 24.1, max 24.5, under voltage events: 0, over voltage events: 0, power good: yes
Heap OK, handles allocated/used 0/0, heap memory allocated/used/recyclable 0/0/0, gc cycles 0
Driver 0: position 0, standstill, SG min/max not available
Driver 1: position 0, standstill, SG min/max not available
Driver 2: position 0, standstill, SG min/max not available
Driver 3: position 0, standstill, SG min/max not available
Driver 4: position 0, standstill, SG min/max not available
Driver 5: position 0
Driver 6: position 0
Driver 7: position 0
Driver 8: position 0
Driver 9: position 0
Driver 10: position 0
Driver 11: position 0
Date/time: 2022-11-14 09:46:06
Cache data hit count 4294967295
Slowest loop: 7.33ms; fastest: 0.17ms
I2C nak errors 0, send timeouts 0, receive timeouts 0, finishTimeouts 0, resets 0
=== Storage ===
Free file entries: 10
SD card 0 detected, interface speed: 20.0MBytes/sec
SD card longest read time 3.6ms, write time 0.0ms, max retries 0
=== Move ===
DMs created 83, maxWait 0ms, bed compensation in use: none, comp offset 0.000
=== MainDDARing ===
Scheduled moves 0, completed moves 0, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1
=== AuxDDARing ===
Scheduled moves 0, completed moves 0, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1
=== Heat ===
Bed heaters = -1 -1 -1 -1, chamberHeaters = -1 -1 -1 -1
=== GCodes ===
Segments left: 0
Movement lock held by null
HTTP is idle in state(s) 0
Telnet is idle in state(s) 0
File is idle in state(s) 0
USB is idle in state(s) 0
Aux is idle in state(s) 0
Trigger is idle in state(s) 0
Queue is idle in state(s) 0
LCD is idle in state(s) 0
Daemon is idle in state(s) 0
Autopause is idle in state(s) 0
Code queue is empty.
=== Filament sensors ===
Extruder 0 sensor: ok
Extruder 1 sensor: ok
=== Network ===
Slowest loop: 199.76ms; fastest: 0.09ms
Responder states: HTTP(0) HTTP(0) HTTP(0) HTTP(0) FTP(0) Telnet(0), 0 sessions
HTTP sessions: 1 of 8

• WiFi -
  Network state is active
  WiFi module is connected to access point
  Failed messages: pending 0, notready 0, noresp 1
  WiFi firmware version 1.23
  WiFi MAC address fc:f5:c4:89:99:6a
  WiFi Vcc 3.44, reset reason Power up
  WiFi flash size 2097152, free heap 22672
  WiFi IP address ...
  WiFi signal strength -37dBm, mode none, reconnections 0, sleep mode modem
  Clock register ffffffff
  Socket states: 0 0 0 0 0 0 0 0