@jay_s_uk Speaking of the board being pretty much at max capacity, would it be beneficial to potentially be looking into a card that would have this capability?

@jay_s_uk legend!

@jay_s_uk Thats a very interesting suggestion, basically limiting it to the print area though the configuration file and run for example 21x21 in just that specific area and a little bit more for allow for the edges have some wiggle room?

@jay_s_uk to me it looks like a DueX5 with a Duet 2 board

Hello guys,
I recently got my new Modix Big 180x installed and set up
Now with such a big print area there are bound to be some warping and such.
Ive calibrated the machine countless of times to try to avoid this but regardless what i do, there is still some issues printing large items, generally on the first layer. The bed compensation macro i have set up does have the 21x21 limitation, has anyone experimented with manipulating the csv file to allow for more points?