https://duet3d.com/wiki/Smart_effector_and_carriage_adapters_for_delta_printer
on you wiki there are only instruction for duet board
could you confirm us that it will be compatible with smoothie or marlin?
https://duet3d.com/wiki/Smart_effector_and_carriage_adapters_for_delta_printer
on you wiki there are only instruction for duet board
could you confirm us that it will be compatible with smoothie or marlin?
The PCB Effector with Nimble and mounting adaptor plus custom E3D V6 comes in at 159 grammes.
Don't know how the Flex would fit TBH the mounting for the custom heatsink is 3x M3 holes on a 18mm PCD which would be tight.
http://i1014.photobucket.com/albums/af270/dougal1957/DSC_0117_zps5zgaq1gs.jpg
Right time to go put it back on the printer
Doug
where is the fan for the print piece?
we need one to have good quality print.
i agree the nimble is top notch but if i need to buy everything i will have for 280e only for the head..110euro for arm+rod kit+ 60euro for pcb+100 with shpping cost for nimble..it s a lot expansive
it s almost the price for my anycubic i3 mega only for parts..
does it possible to mount titan extruder on it?
what will be shipping price for eu?
what kind of sensor does effector use for autobed?
yes dc42 we want to know
do you know where haydn share his Machined Delrin Sockets file?
i would like to print some.
dc42: pleaaaaase take pictureshttps://www.youmagine.com/designs/magnetic-ball-joint-rod-ends
Any good?
thanks again djdemon
thanks you so much
dc42:any news about the price kit
how do you see if you are tilt or not?when you move the head on corners with bubble level?
do you know where haydn share his Machined Delrin Sockets file?
i would like to print some.
dc42: pleaaaaase take pictures
on this calculator i can see for my setup 440mm..
what is you verticale size?
do you think you will have black color pcb instead bleu(it s for better looking )
need an advice from expert
i would like to use 550mm length of horizontal OpenBeam (triangle)
and 1200mm for vertical
for you what will be the best size for length arm
i can t arrive to know what size i need to order on haydn s shop
do you have an idea about the cost for a kit?
i will buy one for my delta xxl project +nimbleI think we will publish the prices tomorrow or Tuesday.
thanks dc42
djd: yes you option is very great for non pcb option
i plan to install one on my original anycubic delta
on my smoothie and xl delta project it will be pcb for a clean design and i really like that we can use zesty nimble on it(the best combo so..light pcb+ the best extruder for delta)
someone know how is made zesty nimble?does it print parts or mould plastic?
other thing dc42.. i have ordered for my carriage made in europe this
https://fr.aliexpress.com/item/1Pcs-Reprap-Aluminum-Alloy-Delta-Kossel-Slide-M3-M4-Tackle-20-15mm-20-20mm-Effector-Kossel/32814331048.html?spm=a2g0s.9042311.0.0.RtfTrZ
20*15mm version..so does it possible to order one with the right size hole directly?
do you have an idea about the cost for a kit?
i will buy one for my delta xxl project +nimble
i really love the design and the light weight
now it will be great to have piezo sensor available for this effector with nimble it could be a beast comboThe nozzle contact sensor is built in, so no need for a piezo. At least one of our beta testers is looking at mounting a Nimble on it.
thanks great
but does it will be better than a simple micro switch accuracy?
does it piezo or other way sensor?
It's a secret until we start shipping them.
does it will be compatible with smoothieware software?
i hope uk shipping cost will not killing us..(it so expansive..)
i really love the design and the light weight
now it will be great to have piezo sensor available for this effector with nimble it could be a beast combo