Best posts made by Lightpath

@Veti said in Faulty Smart Effector:

C"zprobe.in+zprobe.mod"

This should be in the documentation.

For the next person fighting with reprogramming the sensitivity change your M558 command

FROM:
try C"zprobe.in"

TO:

C"zprobe.in+zprobe.mod"

And you'll be able to set the sensitivity. @dc42 Can I add this to the documentation or could a MOD please do it?

Oh good lord look at the Gcode dictionary for M558. There it is right there:

"Bn If 1, turn off all heaters while probing, default (B0) leaves heaters on. (RepRapFirmware 1.21 and later)"

Thank you @dc42