@T3P3Tony said in Formnext 2023:

@LayerStacker it was this design, the instructions include how to just have the bottom half:https://www.teamfdm.com/files/file/612-mini-stealth-orbiter-20/

Thank you so much! I did come across that one but obviously didn't look closely enough. Thanks again.

@T3P3Tony said in Formnext 2023:

@LayerStacker it was this design, the instructions include how to just have the bottom half:https://www.teamfdm.com/files/file/612-mini-stealth-orbiter-20/

Thank you so much! I did come across that one but obviously didn't look closely enough. Thanks again.

@T3P3Tony This was as close as I could find: https://github.com/JackJack3231/MiniSB-Extruder-Mounts

@T3P3Tony, @droftarts Thanks for quick reply! I can see the Stealthburner shape near the bottom but the part cooling fans and top half the front looks modified, was this something you created/modified? I looked at the Mini Stealth and those don't appear to be correct either.

@droftarts What head is this? I saw 3dprinting nerds coverage of it on youtube but couldn't get an answer as to the filament and printhead this is. Now that I see this photo it looks like Overture diamond ASA? I picked up some flashflorge sparkle blue ASA and its decent but I kinda wanna try the Overture now too. Anyways, I'd love to use this head on a single hotend 350mm Voron 2.4.