![](/assets/uploads/system/avatar-default.png?v=1521803371351)
Latest posts made by Karabox
-
Heater temperature drop when G30 command is executed
four tries axis z homing (first from low altitude)
The pid works fine, but when I park my head through the G30 command, I see the temperature drop. After the end of parking, the temperature returns to the set value.
what am I doing wrong
?
-
RE: Help for first time building PanelDue firmware
I didn't find the file on GitHub too
-
RE: PanelDueFirmware 3.2.4 released
@wilriker said in PanelDueFirmware 3.2.4 released:
You could try to use the
PanelDue-v3-5.0.bin
instead. It might work since it uses a slightly different display driver.But note that for clones there is no support.
You were right, the firmware came up, the red color is in place. Thank you very much!
-
RE: Help for first time building PanelDue firmware
I followed the instructions
Can't find String.h file in RRFLibraries\src\General \Where can i find it?
Thanks. -
RE: PanelDueFirmware 3.2.4 released
the first thing I did was update the firmware to 3.2.4, then I noticed that the red and blue colors were changed
I donβt know how it was before the firmware update
I tried now to update 4.3 (v3.0) display to version 3.2.4 - red color in place
-
RE: PanelDueFirmware 3.2.4 released
Hello,
on the last sale bought fystec paneldue 5i (clone), updated it to 3.2.4. Installed and turned on the power. I was very surprised to change the color palette from RGB to BGR. Is this a display issue or a firmware feature?Thanks.