Hey all!
I have a HEVO with BLTouch, E3D Hemera Direct Drive, Duet2 WiFi. It works pretty good for the most part, but there is a few minor issues.
1 - BLTouch when turning on the printer will sometimes just blink red and not deploy/retract probe. I have to manually pull the probe out and then reboot printer for it to work as normal.
2 - Stringing issues. I am thinking maybe speed/acceleration settings could be affecting this.
Would anyone that has a HEVO with somewhat similar hardware and working well be able to share their files so I can compare to mine? A lot of the firmware configuration I am not completely certain is setup properly and would be interested in comparing some of the config settings.
Also, I am thinking of figuring out a way to attach a filament runout sensor.
What is the best way to set Z Offset also, is there a way to baby step it during a print and then lock in the change or do you just have to keep track of the change and then edit the config file?
Thanks for the help,
Justin