Topics created by juls

@juls said in wifi 2 Board skipping steps:

RepRapFirmware for Duet Wifi/Ethernet version 3.4.6

Have you tried updating firmware to 3.5.2 yet?

If the issues stays with the Y axis itself regardless of drivers than it makes me think it's a mechanical binding issue. How heavy is the Y axis?

Please try configuring your Duet in Access point mode where the Duet creates a network SSID that you connect your device to.

https://docs.duet3d.com/en/User_manual/Reference/Gcodes#m589-configure-access-point-parameters

This will help isolate whether the problem is with the Duet side or your routers side.