Your browser does not seem to support JavaScript. As a result, your viewing experience will be diminished, and you have been placed in read-only mode.
Please download a browser that supports JavaScript, or enable it if it's disabled (i.e. NoScript).
undefined
@jay_s_uk I powered down as you suggested, changed the plug to pin Fan0 and now it all works ! i have a controllable part fan 🙂 thanks so much for your help, it was driving me crazy ! turns out i was changing things with power on.
You can modify your homeall.g files to add a faster probe first and then a slower probe afterwards.
Where you have a G30 to probe the bed, change it to add a M558 F command to change the feed rate, then probe. First fast, then slow. Like this:
The A1 says just do it once, the A5 says probe until two consecutive results are basically the same up to 5 times.
