Worked like a charm!

Thanks!

Thanks a lot!

Will try it and let you know!

@jshapiro I had the same result using terminal. It freezes right away and I´m no able to send any code.

Since I use a Mac Im connecting using Mattercontrol.

Automatically when I connect the duet to the usb it powers up tries to connect and completely freezes.

Does not respond to any code.

This is what I was able to see.

Hi,

I was able to connect to a hidden network when typing M552 S1 P"HiddenNetworkName", but when changed M552 S1 to M552 S1 P"HiddenNetworkName" in the config.g file, it just pauses there.

Does not connect to the hidden network when M552 S1 P"HiddenNetworkName" is included in the config.g file.

@dc42 Thanks a lot! Works perfecto now!

@dc42
I tried that and retracts and un retracts fine for T0. But can't do it for T1. I created a file called tfree1.g but I guess there is no command to call that file.

Hi,

I'm using a rostock max V3.2 with a y Splitter at the hot end.
I'm be able to to choose between T0 and T1 but I can't make it retract and advance for the other filament to get it.

Tried using tfree0.g, tpre0.g, tpost0.g files, in order to tell the printer to retract the filament.

I don't know how make the printer to tell t1 to go in when t1 is selected (and after t0 was retracted) and tell t1 to retract when t0 is selected.

I tried creating files called tfree1.g but there would not be a command to call them.

How do you suggest to solve it?