@bearer said in Does not connect to the web interface:
M20 P/www
(7.495) M20 P/www
(0.017) Begin file list<LF>dwc.json<LF>favicon.ico.gz<LF>html404.htm<LF>language.xml.gz<LF>reprap.htm.gz<LF>css<LF>fonts<LF>js<LF>index.html.gz<LF>End file list<LF>ok<LF>
thanks for the reply, I don't understand you, I put M20 P / www in YAT?
Hello, my name is Joshua and I just bought a workbee by Ozznest.
Following the configuration steps I have managed to create an access point and managed to enter the web interface, the problem came when I was updating the software from the web interface, it got stuck and I have not been able to enter the web interface again.
When I enter the address now it goes blankk. Using YAT I can connect duet successfully.
Has something similar happened to you? I don't know what solution to try, I tried to install the files directly to the micro sd and it still comes out the same.
Right now with the M115 command it tells me:
FIRMWARE_NAME: RepRapFirmware for Duet 2 WiFi/Ethernet FIRMWARE_VERSION: 2.03 ELECTRONICS: Duet WiFi 1.02 or later FIRMWARE_DATE: 2019-06-13b2<LF>ok<LF>
Thanks![alt text]