@bearer said in DUET V0.8.5 ethernet connect problem:

@john_1 said in DUET V0.8.5 ethernet connect problem:

I did "ping 192.168.1.14" (the IP address you set in config.g)but i didn't get any answer.

Thats not the IP address you have in the config you showed? Furthermore your Duet IP address and gateway are on separate subnets, 192.168.1.0/24 vs 192.168.2.0/24 - which network is your computer on?

Bearer i tried with default archives.The computer is on the network 192.168.2.0/24.

When i connect the duet the green light of ethernet flashes.
I did "ping 192.168.1.14" (the IP address you set in config.g)but i didn't get any answer.
The problem is in hardware or software?What else can i do to see where the problem is?

Hello,
i have two board RepRap DUET V0.8.5 but only one board RepRap DUET V0.8.5 is connected to the network,on both boards this software is loaded.
First i connect the first board DUET,this from my config

M552 P192.168.2.7 ;
M553 P255.255.255.0 ;
M554 P192.168.1.255 ;

open the chrome browser and i type "192.168.2.7" and loads the page duet web control.

Then disconnect this board and i connect the second duet board with the same files inside the sd card and the same archive "config"

M552 P192.168.2.7 ;
M553 P255.255.255.0 ;
M554 P192.168.1.255 ;

open the chrome browser and i type "192.168.2.7" but it doesn't load the page duet web control.

Why doesn't the second DUET board connect?I need to change something?
The DUET board is connectet to the router,i try the two boards individually,i don't have them both connected at the same time.