Posts made by jjude

@jjude
I removed config.g the filament changer motors and axes, now working fine!

@Phaedrux
Please try to find out..
homez.g homey.g homex.g homeall.g config.g

@Rushmere3D
The printer drives the axes home, nothing else happens.
The notification remains, NEXT is gray

@Phaedrux said in Input Shaping plugin "Machine is not homed!":

3.4.5

Duet Web Control 3.4.5
Duet 2 WiFi/Ethernet 3.4.5
Input Shaping 3.4.1-b1
will still come

I'm trying to run "Record Motion Profile" but I get a message "Machine is not homed!".

All axes is homed.
Input Shaping plugin 3.4.1-b1, DWC 3.4.3, Duet2 Wifi firmware 3.4.3.
Sparkfun accelerometer
https://www.sparkfun.com/products/13963

Wiring and config https://docs.duet3d.com/User_manual/Connecting_hardware/Sensors_Accelerometer

I want to lower the blade during milling, does the babystep work this way?

Is it generally safe to update a CNC machine?
What should be taken into account in the settings of the config file?
Is there a fear that the same VCarve gcode will not work in the 3.x version?

Or if i update 2.02->2.05.1 - HOW?

@chimaeragh I want to make a macro that interrupts the work in progress (doesn't have to be able to continue) and moves the blade to these coordinates. How ???

Can be found somewhere Duet 3 Tool Distribution Board schematics?

Sorry bad english, Google translate...
I control the servo (SG90) with an external 5V power supply.
The countries of the 24V and 5V power supplies are connected together.
I can control my servo on a 1LC board?
1 "thermostatically controlled" fan and 1 PWM controlled fan should be connected to the same board. And of course the hot head and stepper motor. Will the connections succeed and if you can suggest how?

I 3D printer run Duet 2 Wifi, CoreXY machine, with filament changer.
What are the benefits of switching to DUET3 mainboard 6HC and toolboard 1LC V1.1 ?

@chrishamm
Can you give an example of how I can send GCODE if the IP of my printer is 123.123.321.3 ?

@chrishamm Too bad that was removed.
Can I send GCODE from an external program via Wi-Fi?

I don't see a choice?!?

@mike3d note: PanelDue can only use QOI format. PrusaSlicer 2.4.1 not creating yet QOI.

@argo I take advantage of this thread and ask how to do the correct heater and ped PID tuning step by step in version 3.4.0rc2+2 ?

M80 Error: M80: No PS_ON port defined
Does this have to be defined somehow now?
In the former watershed 3. ?? worked well.
So I use a Duel2 WIFI board...