Posts made by james3d

Hi,
Reading this tread seems to be the excatly same issue im having

Hi All

My endstops do not respond. LEDs are lit when not triggered, when i try to invert them via the config tool or via the the config. file it makes no difference. I have have used every setting I can and could find online, including testing the wiring and switches and replacing switches. Is it my board?

Ps. Its Duet Wifi 2 on an Ender 3 could someone confirm their config. file to confirm Im not doing and stupid even tho I thing I have tried every setting possible. Also this is after a 2.0.4 firmware up grade..

Thanks

Hi All

My endstops do not respond. LEDs are lit when not triggered, when i try to invert them via the config tool or via the the config. file it makes no difference. I have have used every setting i can and could find online, including testing the wiring and switches and replacing switches. Is it my board?

Ps. Its Duet Wifi 2 on an Ender 3 could someone confirm their config. file to confirm Im not doing and stupid even tho I thing I have tried every setting possible.

Thanks

Hey sorry I wasnt aware of of Bossa or having to flash firmware for the screen. I have flashed the firmware and all is working again perfectly.
Thanks for all your help.

I flashed using the web interface

Hi I have flashed the firmware many times which has made no difference, still just the led.
Thanks

Sorry for the late replay. The Bossa Program Port does show up in device manager. So what's next. Does have to be flashed?

There is what seems to be a small led that lights up at the based of the screen but that is it.

My i7 paneldue has failed after an hours use!