Posts made by HudsonCap

BL touch

ok thank you i will try

you are correct im run stock

i am not connected to the printer except for octoprint will this work

how do i find the contents of config.g and the others?

I cant get my Bl touch z offset right. I have an ender 3 pro and iv fallowed many guides none of them have fixed my problem. first when it looks right the front of the print is fine but the back is to lose any help would be helpful. i am new to 3d printing so if im doing something wrong its probably because of that.

Ok after doing some research I Figured out what you mean the z offset is not the problem due to the fact that the printer acts like the BL touch is not there its the exact same if i didnt have it the bl touch works fine but dost seem to efect any thing.

@engikeneer I realy sorry im am new to 3d printing and i cant understand want you want me to do.

I recently got a BL touch for my ender 3 pro and installed it. It appears to work but It makes no apparent adjustments any help would be appreciated. This is also from out of the crealty kit.