Posts made by Guffy

hi guys
a step forward in the post processor.
i have decided to split the code of pp to 4 files
DIYCNC_Common.js – common code
DIYCNC_Grbl11.cps – code and properties specific to grbl
DIYCNC_Marlin20.cps – code and properties specific to marlin 20
DIYCNC_RepRapFW.cps – code and properties specific to reprap firmware
so now you will see 3 post processors in the Fusion drop down box instead of selecting target firmware in the properties.
as result there is much less messing of properties belong to different firmwares in the properties control

so if anyone interesting it is here
https://github.com/guffy1234/mpcnc_posts_processor

hi guys
I'm also develop Fusion 360 post processor. I had been designed for MPCNC and milling from SD card.
Initially it was for Marlin 2.0 only, later I had added Grbl 1.1.
So it's multi target now.
And now I have added RepRap Firrmware (based on Marlin target).
It supports:
manual spindle control or use M3/M5
manual tool changing + measuring the tool with G28 Z
laser mode with using M106/M107 or M3/M5 or M42
controlling of 2 channels of coolant
particular parts of gcode could be replaced by external files