@PaulHew thanks heaps. Setting the laptop to enable DHCP has fixed the problem, although i'll need to look into being able to set my laptop ip as static to suit some other applications
Latest posts made by geekness
-
RE: Unable to connect to DuetWIFI
-
RE: Unable to connect to DuetWIFI
I think I see a problem.
The ip is set to 10.1.1.182, but my router is assigning 10.1.1.184.If this is a problem, how does my phone connect?
-
RE: Unable to connect to DuetWIFI
; Network
M550 P"RigidBot" ; Set machine name
M552 S1 ; Enable network
M587 S"WIFI Disconnected" P"***" I10.1.1.182 J10.1.1.1 K255.255.255.0 ; Configure access point and IP addresses. You can delete this line once connected
M586 P0 S1 ; Enable HTTP
M586 P1 S0 ; Disable FTP
M586 P2 S0 ; Disable Telnet -
RE: Unable to connect to DuetWIFI
C:\Users\nwith>ipconfig/all
Windows IP Configuration
Host Name . . . . . . . . . . . . : LAPTOP-JOFNRE8S
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : lanEthernet adapter Ethernet:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Realtek PCIe GBE Family Controller
Physical Address. . . . . . . . . : B0-6E-BF-AC-76-6D
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : YesWireless LAN adapter Local Area Connection* 1:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft Wi-Fi Direct Virtual Adapter
Physical Address. . . . . . . . . : D6-25-8B-38-BD-E6
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : YesWireless LAN adapter Local Area Connection* 2:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft Wi-Fi Direct Virtual Adapter #2
Physical Address. . . . . . . . . : D4-25-8B-38-BD-E7
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : YesWireless LAN adapter Wi-Fi:
Connection-specific DNS Suffix . : lan
Description . . . . . . . . . . . : Intel(R) Dual Band Wireless-AC 8265
Physical Address. . . . . . . . . : D4-25-8B-38-BD-E6
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
IPv6 Address. . . . . . . . . . . : 2001:44b8:6130:fc00:79c8:c35b:e541:91e4(Preferred)
IPv6 Address. . . . . . . . . . . : fdbf:aa99:f3e5:0:79c8:c35b:e541:91e4(Preferred)
Temporary IPv6 Address. . . . . . : 2001:44b8:6130:fc00:10e9:ec1c:73ae:f8a5(Preferred)
Temporary IPv6 Address. . . . . . : fdbf:aa99:f3e5:0:919d:e27c:ad35:22fd(Preferred)
Temporary IPv6 Address. . . . . . : fdbf:aa99:f3e5:0:9435:ff6a:8ad9:9b76(Deprecated)
Link-local IPv6 Address . . . . . : fe80::79c8:c35b:e541:91e4%8(Preferred)
IPv4 Address. . . . . . . . . . . : 10.1.1.44(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.255
Default Gateway . . . . . . . . . : fe80::a691:b1ff:fe2c:a690%8
10.1.1.1
DHCPv6 IAID . . . . . . . . . . . : 81012107
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-23-D7-0D-B1-B0-6E-BF-AC-76-6D
DNS Servers . . . . . . . . . . . : fe80::a691:b1ff:fe2c:a690%8
192.231.203.132
192.231.203.3
NetBIOS over Tcpip. . . . . . . . : Enabled
Connection-specific DNS Suffix Search List :
lanEthernet adapter Bluetooth Network Connection:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Bluetooth Device (Personal Area Network)
Physical Address. . . . . . . . . : D4-25-8B-38-BD-EA
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes -
RE: Unable to connect to DuetWIFI
Thanks for the reply.
I did the ping and got the similar results.
I tried to use edge, but got the same can not connect error.
It must be a windows firewall problem? -
RE: Unable to connect to DuetWIFI
I can confirm that I am able to connect by wifi to the printer from my phone, just not my laptop.
hmmmmm, i'm very confused, but im sure someone here has the solution -
Unable to connect to DuetWIFI
Hi, Its been about 6 months since I used my printer, and now im having issues trying to connect to it.
I can confirm that the board (Duet WIFI) is connected to my network because when I check on my duet Panel, I get the message "WIFI Module is connected to access point ...........10.1.1.184"
If I log into my router, and can also see the printer is connected to 10.1.1.184I have run through this https://duet3d.dozuki.com/Guide/1.)+Getting+Connected+to+your+Duet/7
set up page again, but im still unable to connect.
I found that I am running version 2.02If I type "10.1.1.184" into my Chrome address bar, I constantly get the unable to connect message.
I think im having an issue with my laptop maybe, like im forgetting a setting.
Your help would be greatly appreciated.
-
RE: Hot end: Auto tune of heater 1 failed
@dc42 haha, yes woops. Swapped it out for 24V. Thanks again
-
RE: Hot end: Auto tune of heater 1 failed
@phaedrux I came home tonight and checked my heater cartridge, and yes it is a 12V cartridge.
I swapped it out for a 12V cartridge then ran auto tune again, and voila, I now have a functioning hot end. Thanks. -
RE: Hot end: Auto tune of heater 1 failed
@phaedrux
Hmm, no-not tested.
I'll test it tonight when I get home. What kind of resistance should I be looking for each voltage cartridge?
What is the resistance value I should be getting for 12V vs 24V?
Im pretty sure its a 40W cartridge either way, but It should be easy enough to figure out