Hello,
this question is probably best suited for @dc42
1.What is the custom input shaper and how will it be different from the others ?
2.Will it be possible to damp different frequencies on x and y with the a) the same input shaper or b) with different shapers ?
3.When do you think, you release the first beta firmware for duet3 + sbc + lc1 v1.1 with the new shapers?
TiA
Kindly Regards
Frederik
Problem Solved
Yesterday, i got the Replacement Toolboard.
After connecting and power up my machine , everything was lighting up as expected.
Now everything is working as expected and blinks in sync. I`m using now RF 3.2.beta4.3
Thanks for your Help
Regards Frederik
@Veti Thank You SOooooooOO much for your tip with the usb cable....i tried a 10 year old usb2 dvd cable (with dual A Plugs on one side). After connecting the second the firmware flashed perfektly on the first try ;).
I would be so lost without you guys and this forum 
Have a nice Day !
@dc42
perhaps a lot more people would consider using the sbc mode on duet3 boards, if it would offer more features / functionality as right now .
most people dont want to hassle with another level of complexity, only to add wifi and offload the webapplication with a few plugins.
Im personally looking forward what the future will bring. My Duet 3 is Running in sbc Mod + Lc1 v1 almost a Year now with very little trouble, while riding the unstable branch the whole time
WOW, Thank You soooo much.
Now my Z Axis working almost spot on...only minor adjustments needed.
Your Tip with the Extruder E steps was perfekt.
now there is only the error message from the filament Sensor ,
and i have to try if the auto bed leveling with the 3 independet z motors will work as expected with my BLTouch.
What Slicer do you use or recommend ?
I tried
Cura 4.8.0 and Prusaslicer .
Simplyfy 3d looks also realy nice, but i cant find a demmo version or similar. Its a hefty Price Tag for a Slicer and when i am reading the reviews on the internet ,i dont know if it is good at the moment with 4.1 or should i wait till the new update is released ?
@Frederikfor information purposes:
The cable that did NOT work: brand new Ugreen with 3Meters in lenght.
The cable THAT worked: 10 Year old usb2.0 with dual USB-A Plug on one side.
Like the on the external dvd or harddrives. Lenght ~ 40cm
Hello,
i tried the same with my Raspberry Pi 3b+ and the new Pi Cam v2 with 8MP Sensor and the MakerHawk Wide Angle Lens 165°
I used this WebInterface:
https://github.com/silvanmelchior/RPi_Cam_Web_Interface
it works realy well, because you dont have to go in the Linux Terminal to change Camera Settings. It all works over the Duet Webcam Field.
I used port 8081 but that is up to your preferences.
Regards
Frederik
@fcwilt you are right it was a wrong setting from yesterday. its a normal tr8 4 stop with 8 Lead Spindle
so, now to a new start... nozzle free again, probe working (was a light loose crimp pin on the black wire)
ok ,looks good so far. i startet my first 20mm xyz test cube fingers crossed , i hope it will run through without clogging
This is my very first successful Print:
It should be 20x20x20
And the actual dimensions are
X 20.10 MM WITH STEPS 160
Y 20.10 MM EITH STEPS 160
Z 20.40 MM WITH STEPS 400
@3dML I will save 4 workspace positions on the outer corners so that i am always probing at the same spots, and check the mounting of the bed + possible options for what to improve...
right now it sits on 4 silicone pads.
i could change to springs or to 4 solid openbuild Blocks
@matt3o @Phaedrux
Today, I tried the update to 3.3 beta a second time with a fresh image. Now it worked and i can see if there is any Jitter or lost can messages to the Toolboard.
