Best posts made by flyeyes

@flyeyes

my bad, just realized it was in the wrong directory. moved it and now updated, but same problem: no WiFi connectivity

It was working fine until it wasn't, network is fine.

@phaedrux

I've tried that now 3x. Can connect through serial as before, but no WiFi.

Removed MicroSD card, placed in computer and manually replaced the DuetWiFiServer.bin file 3x (twice on a Mac, once on a windows machine for grins) but M997 returns an error:

Error: M997: File 0:/firmware/DuetWiFiServer.bin not found

The file is in the sys directory, where I found it originally.

Quite frustrated, was chasing down the final hardware details and now can't run the printer.

I do have a Pi 4 available, should I just try that and give up on the Duet WiFi?

@phaedrux

m587
Remembered networks: none
ok
m122
=== Diagnostics ===
RepRapFirmware for Duet 3 Mini 5+ version 3.3 (2021-06-15 21:46:11) running on Duet 3 Mini5plus WiFi (standalone mode)
Board ID: D79UH-2096U-D65J0-40KMU-0G03Z-R76Y7
Used output buffers: 1 of 40 (1 max)
=== RTOS ===
Static ram: 102724
Dynamic ram: 104600 of which 464 recycled
Never used RAM 35916, free system stack 145 words
Tasks: NETWORK(ready,7.3%,520) HEAT(delaying,0.0%,420) Move(notifyWait,0.1%,362) CanReceiv(notifyWait,0.0%,941) CanSender(notifyWait,0.0%,371) CanClock(delaying,0.0%,340) TMC(notifyWait,0.0%,124) MAIN(running,91.4%,629) IDLE(ready,0.4%,29) AIN(delaying,0.8%,274), total 100.0%
Owned mutexes: USB(MAIN)
=== Platform ===
Last reset 00:00:30 ago, cause: power up
Last software reset at 2021-12-31 14:04, reason: User, GCodes spinning, available RAM 35076, slot 0
Software reset code 0x0003 HFSR 0x00000000 CFSR 0x00000000 ICSR 0x00000000 BFAR 0xe000ed38 SP 0x00000000 Task MAIN Freestk 0 n/a
Error status: 0x00
MCU revision 3, ADC conversions started 30540, completed 30540, timed out 0, errs 0
Step timer max interval 731
MCU temperature: min 16.9, current 20.4, max 20.6
Supply voltage: min 0.2, current 0.7, max 0.7, under voltage events: 0, over voltage events: 0, power good: no
Heap OK, handles allocated/used 0/0, heap memory allocated/used/recyclable 0/0/0, gc cycles 0
Driver 0: position 0, ok, SG min/max not available, read errors 0, write errors 0, ifcnt 0, reads 0, writes 0, timeouts 0, DMA errors 0
Driver 1: position 0, ok, SG min/max not available, read errors 0, write errors 0, ifcnt 0, reads 0, writes 0, timeouts 0, DMA errors 0
Driver 2: position 0, ok, SG min/max not available, read errors 0, write errors 0, ifcnt 0, reads 0, writes 0, timeouts 0, DMA errors 0
Driver 3: position 0, ok, SG min/max not available, read errors 0, write errors 0, ifcnt 0, reads 0, writes 0, timeouts 0, DMA errors 0
Driver 4: position 0, ok, SG min/max not available, read errors 0, write errors 0, ifcnt 0, reads 0, writes 0, timeouts 0, DMA errors 0
Driver 5: position 0, ok, SG min/max not available, read errors 0, write errors 0, ifcnt 0, reads 0, writes 0, timeouts 0, DMA errors 0
Driver 6: position 0, ok, SG min/max not available, read errors 0, write errors 0, ifcnt 0, reads 0, writes 0, timeouts 0, DMA errors 0
Date/time: 1970-01-01 00:00:00
Cache data hit count 66198261
Slowest loop: 9.62ms; fastest: 0.11ms
=== Storage ===
Free file entries: 10
SD card 0 detected, interface speed: 22.5MBytes/sec
SD card longest read time 3.1ms, write time 0.0ms, max retries 0
=== Move ===
DMs created 83, maxWait 0ms, bed compensation in use: none, comp offset 0.000
=== MainDDARing ===
Scheduled moves 0, completed moves 0, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1
=== AuxDDARing ===
Scheduled moves 0, completed moves 0, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1
=== Heat ===
Bed heaters = -1 -1, chamberHeaters = -1 -1
=== GCodes ===
Segments left: 0
Movement lock held by null
HTTP is idle in state(s) 0
Telnet is idle in state(s) 0
File is idle in state(s) 0
USB is ready with “m122” in state(s) 0
Aux is idle in state(s) 0
Trigger is idle in state(s) 0
Queue is idle in state(s) 0
LCD is idle in state(s) 0
SBC is idle in state(s) 0
Daemon is idle in state(s) 0
Aux2 is idle in state(s) 0
Autopause is idle in state(s) 0
Code queue is empty.
=== CAN ===
Messages queued 153, received 0, lost 0, longest wait 0ms for reply type 0, peak Tx sync delay 0, free buffers 17 (min 17), ts 153/0/0
Tx timeouts 0,0,152,0,0,0 last cancelled message type 30 dest 127

=== Network ===
Slowest loop: 0.16ms; fastest: 0.00ms
Responder states: HTTP(0) HTTP(0) HTTP(0) HTTP(0) FTP(0) Telnet(0), 0 sessions
HTTP sessions: 0 of 8

• WiFi -
  Network state is disabled
  WiFi module is disabled
  Failed messages: pending 2779096485, notready 2779096485, noresp 2779096485
  Socket states: 0 0 0 0 0 0 0 0
  ok

@phaedrux

tried to send more, but "flagged as spam."

587 returns no remembered networks. Have tried reentering SSID and password probably 30+ times