Posts made by Fab

This looks like the thing i´m looking for. Will try it

Hey,

did someone have the copy or mirror mode running on the duetwifi ? The M605 command didn´t work on the duet.

thanks for help

Hey,

i tried many ways to connect the PT100 sensor from the heater (E3D V6 & Titan Aero), but nothing works.

Here the Part of the code:

; Heater and thermistor section

M305 P0 T100000 B4388 R4700 H30 L0 ; Put your own H and/or L values here to set the bed thermistor ADC correction
M305 P1 X200 ; Put your own H and/or L values here to set the first nozzle thermistor ADC correction
;M305 P2 R4700 H0 L0 ; Put your own H and/or L values here to set the second nozzle thermistor ADC correction
M301 H1 P10 I0.10 D100 T0.50 S1.0 ; PID settings for extruder 0
;M301 H2 P10 I0.10 D100 T0.50 S1.0 ; PID settings for extruder 1
M570 S120 ; Increase to allow extra heating time if needed
M106 F10 ; Fix for Bigbox Blowe

And here some pictures from the connection:

https://www.dropbox.com/s/ekknr33pnbbsdv8/Foto 19.10.18%2C 18 52 03.jpg?dl=0

https://www.dropbox.com/s/sqqgedn6fkl6ka4/Foto 19.10.18%2C 18 50 45.jpg?dl=0

Here is the software information:

(startet with firmware 1.18)

Software Information
Firmware Name: RepRapFirmware for Duet 2 WiFi/Ethernet
Firmware Electronics: Duet WiFi 1.02 or later
Firmware Version: 2.02RC3(RTOS) (2018-10-17b2)
WiFi Server Version: 1.21
Web Interface Version: 1.22.4-b1
Web Interface by Christian Hammacher
Licensed under the terms of the GPL v3

maybe someone here know´s what to do, or have some ideas what to try.

best regards
fab