@Phaedrux Replaced the probe and got the same error. I made sure to make sure the probe deployed and retracted first which it did fine. When I go to run the height map it moves to the middle of the bed and deploys and retracts fine. It then moves to the front corner, probe deploys and that's when the error appears and it stops.

The pin of my BL Touch was bent which I was able to straighten but ever since when I try to do a new height map I receive the error "probe already triggered at start of probing move." I've made sure to home the x, y and z axis and I've been able to successfully run the deploy and retract commands. I've also rebooted as well. Any ideas why this error keeps occurring and do I just need to replace the pin even though it was straightened out and freely deploys and retracts?