@dc42 Thanks! Which resistor should I remove as the "termination resistor?"
Posts made by drivetrainsystems
-
RE: Mini 5+ 3 deepposted in Duet Hardware and wiring
-
RE: Mini 5+ 3 deepposted in Duet Hardware and wiring
According to the documentation for a Mini 5+, in order to connect 3 or more Mini 5+ boards via CAN I should remove the CAN termination resistors of the boards between the beginning and end of the chain. However, I cannot located this resistor. I don't know if it is a matter of desoldering a resistor or removing a jumper, and I cannot find the component.
-
Mini 5+ 3 deepposted in Duet Hardware and wiring
Is it possible, and how should I accomplish, 3 Mini 5+ boards connected as expansion boards?