Posts made by dkbug

Ok….. what about the panel due? Does that require me to have a router?

Hello,

Currently, I am in my senior year of mechanical engineering and I am manufacturing a large volume FDM printer. I opt to use the duet wifi as it's the one I have set up at home on my current build. An issue I did not account for when ordering the duetwifi was that my university does NOT allow rogue connections on the network. I am prompted to select an ssid which required a login username and a password. My university has made it very apparent that adding a router on campus is a big negative, and that they will not allow my printer to access the network, so that throws out the option of using a separate router. I do not want to use my phone as I am not always equipped with one nor do I stay one campus long enough to stay connected.

My question for you is as follows. Is it possible to access the duet interface via usb connection? I have access to a usb port which is located on the computer that has been dedicated for this project.

What are my options?

Hello all,

I have been searching for awhile in regards to the one-wire thermistor that the silicone heaters are equipped with. According to the wiring diagram for the wifi, there is a 2-pin terminal for a conventional thermistor. How do I go about wiring up a 1-wire thermistor?

Thanks