@Phaedrux said in G29 with BLTouch:
Your G31 is missing a Z offset. Is it called anywhere else? I can't see it in the other files.
If you send G31 by itself in the gcode console, what does it respond with?
The Z offset for the probe is set in another file.
ABL with 4 point leveling works, and the probe deploys correctly.
@Phaedrux said in G29 with BLTouch:
Have you contacted Modix support?
This has been pretty fruitless, and looking through the files they have on their github, it is a mess. There are deprecated commands in macros and config files. After the experience we have had assembling it, and with the quality of their wiring harnesses, I do not trust anything that they have made.
@Phaedrux said in G29 with BLTouch:
Try doing the probe tests here. That should give us an idea of where to look next.
I will try that when I get to the office tomorrow. I think I'm just going to wipe the machine and put a fresh config on it and fresh macros. I have two custom built duet machines at home that I've never had issues with, so I know it's something that they've done with their files.
