Topics created by Daz_Rich

@Phaedrux said in Type of wire, duet 3 to toolboard:

it's phone cable for the boards with an actual connector.
https://docs.duet3d.com/en/User_manual/Machine_configuration/CAN_connection
Yes you'd want to ground the metal work as decribed.

Magic that answered what I needed, hopefully the last part till it's reliable

Then to the upgrades 40x40 instead of 20x20

@T3P3Tony

Excelent hopefully when done I'll be happy and upload the step of the negative space needed

@o_lampe

AS5601
Ø3MM unknown length

Click on the Topic Tools icon (the little gear) and select "ask as question". Then click on it again and select "mark as solved".

@Daz_Rich said in Am I a Fool?:

I was thinking either some kind of SD hot swap card with a switch might exist (SD-card and switch is no longer a searchable term, thanks Nintendo)

it exist, device plugs into SD card slot and has one sd card slot and one usb host port for a usb flash or even 2 sd card slots, usb client port where you connect a computer that control the switch.. it's rather expensive and used for development, does not really makes sense for your purpose

connectors are these (ATX 24 pin), not DB 25,

😄 😄 Those are great, I was replying before first coffee no clue how I seen DB25 😄