Posts made by DariusR4

@DariusR4
i clean all files from SD card in slot 0

Can sobody help?
what i need to do?

2023-06-26 11:17:44 m39
SD card in slot 0: capacity 29.00Gb, partition size 29.00Gb,free space 0.00Gb, speed MBytes/sec

m122
=== Diagnostics ===
RepRapFirmware for Duet 3 MB6HC version 3.4.0 (2022-03-15 18:57:24) running on Duet 3 MB6HC v1.01 or later (SBC mode)
Board ID: 08DJM-956BA-NA3TN-6JKD6-3SN6Q-TB8GU
Used output buffers: 1 of 40 (13 max)
=== RTOS ===
Static ram: 151000
Dynamic ram: 66692 of which 0 recycled
Never used RAM 132980, free system stack 192 words
Tasks: SBC(resourceWait:,0.6%,478) HEAT(notifyWait,0.0%,321) Move(notifyWait,0.0%,352) CanReceiv(notifyWait,0.0%,772) CanSender(notifyWait,0.0%,374) CanClock(delaying,0.0%,339) TMC(notifyWait,7.9%,92) MAIN(running,91.4%,923) IDLE(ready,0.0%,30), total 100.0%
Owned mutexes: HTTP(MAIN)
=== Platform ===
Last reset 00:36:39 ago, cause: software
Last software reset at 2023-06-26 10:33, reason: User, GCodes spinning, available RAM 133012, slot 0
Software reset code 0x0003 HFSR 0x00000000 CFSR 0x00000000 ICSR 0x00400000 BFAR 0x00000000 SP 0x00000000 Task SBC Freestk 0 n/a
Error status: 0x00
Step timer max interval 134
MCU temperature: min 38.8, current 38.9, max 39.1
Supply voltage: min 24.3, current 24.4, max 24.4, under voltage events: 0, over voltage events: 0, power good: yes
12V rail voltage: min 12.1, current 12.1, max 12.2, under voltage events: 0
Heap OK, handles allocated/used 0/0, heap memory allocated/used/recyclable 0/0/0, gc cycles 0
Events: 0 queued, 0 completed
Driver 0: standstill, SG min n/a, mspos 8, reads 264, writes 0 timeouts 0
Driver 1: standstill, SG min n/a, mspos 8, reads 264, writes 0 timeouts 0
Driver 2: standstill, SG min n/a, mspos 8, reads 264, writes 0 timeouts 0
Driver 3: standstill, SG min n/a, mspos 8, reads 264, writes 0 timeouts 0
Driver 4: standstill, SG min n/a, mspos 8, reads 264, writes 0 timeouts 0
Driver 5: standstill, SG min n/a, mspos 8, reads 264, writes 0 timeouts 0
Date/time: 2023-06-26 11:13:29
Slowest loop: 1.46ms; fastest: 0.05ms
=== Storage ===
Free file entries: 10
SD card 0 not detected, interface speed: 37.5MBytes/sec
SD card longest read time 0.0ms, write time 0.0ms, max retries 0
=== Move ===
DMs created 125, segments created 0, maxWait 0ms, bed compensation in use: none, comp offset 0.000
=== MainDDARing ===
Scheduled moves 0, completed 0, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1
=== AuxDDARing ===
Scheduled moves 0, completed 0, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1
=== Heat ===
Bed heaters 0 4 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1, chamber heaters -1 -1 -1 -1, ordering errs 0
=== GCodes ===
Segments left: 0
Movement lock held by null
HTTP* is doing "M122" in state(s) 0
Telnet is idle in state(s) 0
File is idle in state(s) 0
USB is idle in state(s) 0
Aux is idle in state(s) 0
Trigger* is idle in state(s) 0
Queue is idle in state(s) 0
LCD is idle in state(s) 0
SBC is idle in state(s) 0
Daemon is idle in state(s) 0
Aux2 is idle in state(s) 0
Autopause is idle in state(s) 0
Code queue is empty
=== CAN ===
Messages queued 318, received 1418, lost 0, boc 0
Longest wait 0ms for reply type 0, peak Tx sync delay 5, free buffers 50 (min 50), ts 176/176/0
Tx timeouts 0,0,0,0,0,0
=== SBC interface ===
Transfer state: 4, failed transfers: 0, checksum errors: 0
RX/TX seq numbers: 19741/19741
SPI underruns 0, overruns 0
State: 5, disconnects: 0, timeouts: 0, IAP RAM available 0x2b858
Buffer RX/TX: 0/0-0, open files: 0
=== Duet Control Server ===
Duet Control Server v3.4.0
Code buffer space: 4096
Configured SPI speed: 8000000Hz, TfrRdy pin glitches: 0
Full transfers per second: 38.60, max time between full transfers: 53.2ms, max pin wait times: 38.2ms/13.4ms
Codes per second: 0.03
Maximum length of RX/TX data transfers: 6132/796