Posts made by daimein2007

Looking for anyone with a Kossel that has updated to the new RR3 firmware and Mabey wouldn't mind sharing a copy of their system files (config.g and ect and or macros) I'm using a mostly un modded machine minus board of course and still using the z probe that came with the machine. I took forever getting this configured the first time. I have stepped away from it since it has been running well for 2 years I decided to update firmware and well here we are. I thank you for any help.

@dc42 I'm not sure if this is right for me I'm using 2209's I have installed a RepRap board on an skrv1.3 which converts to duet and uses duet firmware I set everything up for sensorless homing and used the https://teamgloomy.github.io/Configurator/Start
tool to configure it I just keep getting this even after hours and hours of checking all settings G28 Error: Failed to enable endstops it's almost like homing itself is not enabled if that's even possible. I get it when trying x or y z is setup on bltouch cant do z without x and y i have searched every square inch of config and setup my x y and z but nothing is it possible there could be a bug. I have a duet2 wifi on my delta never had this problem.

@tkdirp I have same issue did you ever find out the resolve?