Best posts made by curlypaul

@arcadekilla

Are these connecters touching each other ?

Sorry to hijack, but if you've gone that far, how about re-doing the bed completely ?

After struggling with our N2 Printers, I changed the bed at the same time (as fitting a duet wifi and piezo for z probing) to a machined C250 bed into which i put standard glass into, and heated with a mains powered pad

The stock bed is woeful at best anyway

Has transformed it into a pretty good printer now

@Phaedrux it's a bit hard to explain/remember properly without being with the printer, but the main issue is U will move towards the homed X when homing Y.
also X,Y,U positions are lost/reset when homing other axis
Seemingly random but repeatable moves after and during homing.
Certainly with 2.03,2.04 and 2.05, the UV motors won't move at all if a movement in XY is commanded, resulting in what at the time I called 'angry noises'
Where as 2.02 set at K5, seems to have the printer work exactly as I'd expect

It might be best to video the difference and let that explain