@csoup50 Im printing again, its been two days. Thank you again!

@csoup50 Im printing again, its been two days. Thank you again!

@Phaedrux well it looks like you got me on the right track. I commented all those out as you said and added the command. Now im not getting the errors that I couldnt figure out! Thank you so much!!!

@Phaedrux Ok, I get what your saying. it seemed to be the only way to alleviate the errors. After removing the M574 I now get these errors. Error: Failed to enable endstops
4/14/2023, 8:10:11 PM G28
Error: Pin name needed for switch-type endstop on Z axis

To your second point, I want the build plate to drop slightly to reduce risk of dragging on the build plate before X and Y home.

@Phaedrux Ok I removed the M574 for the Z. What do you mean its confusing, Im not seeing what you are. Its me not you.

My intention is to lower Z, home x y and then home z with the probe.

I have been running this machine for a while and then updated to the new beta 3.5 beta 2 and now I cant seem to get the homing to play nice. I was on 3.30 prior to the update and everything was working fine. Its driving me crazy and I cant seem to find the answers, Ive tried so many things but nothing seems to solve it. Thank you for your help!!!

Duet2 Wifi
Piezo Probe connected to zprobe pin, zprobe used as endstop
CoreXY

M98 P"config.g"
HTTP is enabled on port 80
FTP is disabled
TELNET is disabled
Error: Pin 'zprobe.in' is not free
Error: Invalid Z probe index

config.g
homeall.g