Posts made by Camaro1

It seems I can connect to router but the screen is blank. On the url tab it shows Duet wifi but my screen is blank.
here is some info.
m115
FIRMWARE_NAME: RepRapFirmware for Duet 2 WiFi/Ethernet FIRMWARE_VERSION: 2.05.1 ELECTRONICS: Duet WiFi 1.02 or later FIRMWARE_DATE: 2020-02-09b1<LF>ok<LF>
m552
WiFi module is connected to access point Davis, IP address 192.168.1.107<LF>ok<LF>
m122
=== Diagnostics ===<LF>RepRapFirmware for Duet 2 WiFi/Ethernet version 2.05.1 running on Duet WiFi 1.02 or later<LF>Board ID: 08DDM-9FAM2-LW4SD-6JKF2-3SJ6R-KLZRY<LF>Used output buffers: 1 of 24 (1 max)<LF>=== RTOS ===<LF>Static ram: 25712<LF>Dynamic ram: 93096 of which 460 recycled<LF>Exception stack ram used: 260<LF>Never used ram: 11544<LF>Tasks: NETWORK(ready,1448) HEAT(blocked,1232) MAIN(running,3824) IDLE(ready,160)<LF>Owned mutexes:<LF>=== Platform ===<LF>Last reset 00:00:52 ago, cause: power up<LF>Last software reset time unknown, reason: User, spinning module GCodes, available RAM 11340 bytes (slot 0)<LF>Software reset code 0x0003 HFSR 0x00000000 CFSR 0x00000000 ICSR 0x0441f000 BFAR 0xe000ed38 SP 0xffffffff Task 0x4e49414d<LF>Error status: 0<LF>Free file entries: 10<LF>SD card 0 detected, interface speed: 20.0MBytes/sec<LF>SD card longest block write time: 0.0ms, max retries 0<LF>MCU temperature: min 33.9, current 35.2, max 40.1<LF>Supply voltage: min 0.2, current 0.4, max 0.5, under voltage events: 0, over voltage events: 0, power good[Warning: Maximal number of characters per line exceeded! Check the line break settings in [Terminal > Settings... > Text...] or increase the limit in [Terminal > Settings... > Advanced...].]
I am in the HVAC and I struggle some,if someone could point me in the right direction it would be awesome. The Duetwifi board has worked great for along time until now.
Thanks in advance.