Posts made by Brandon019349

Ok I think I have everything else set up the only thing that I need to figure out is why my extruder doesn't go to the center of the bed to home the Z axis. I dont think i have any configuration files for the bl touch either. I'm not sure how to get those because everything that I have seen has been for different machines and not with a maestro.

I have gotten to the web controller and have read all manuals I can find and still don't understand how to get this to work. I feel stupid that I don't understand this stuff but I dont and need more guidance than words on a manual that doesnt go into depth at all

@veti said in Cant Get Board Setup PLEase HELPPP!!!:

https://duet3d.dozuki.com/Wiki/Connecting_a_Z_probe

This is the issue Im having. I dont understand any of this stuff so i don't understand half the stuff they are saying to set it up. Thats why i need help

There isnt really a guide for Ender 3 with bl touch Duet 2 Maestro and micro swiss hotend.

I have an ender 3 but the guy that i got it from added lots of stuff like the bl touch

Its like it doesnt know the bed is there and i dont know how to make it use the bltouch instead of the head

I got the web controller up but now it wont home Z

and also where do i go from here to get everything started up?

Does everything else seem to be in order for everything to work. Not sure how to set up by BLtouch either

So the 1.2.2 version one?

https://drive.google.com/drive/folders/14POg90G4DvJGXUOMQp9gf12K697tTg2U?usp=sharing

im using Macbook

How do I do that?

I have followed the directions to set it up so many times and still cant get it to work.

The problem is that I dont know how to set any of this up. I bought this off someone and they didnt give me any of the information on how to use it. Never used a Duet controller before and it doesnt have the LCD panel anymore either

Please help me and contact me at Brandon019349@gmail.com. I have gotten everything set up I believe but when i try to get on to the web controller it says "Check that the SD card is mounted and has the correct files in its /www folder"