Posts made by Boull

@Phaedrux

![alt text]I place the videos in private.

@Phaedrux Haaa !! Thank you sir, I did not want to have a bad adventure with Duet because I want to buy 2 others for future projects. Thank you very much and I am contacting Spool3D thank you and have a good evening !!

Another video showing where the panel's faults are. If this is not proof of manufacturing defects I do not understand. This card is new. Thank you. https://www.youtube.com/watch?v=NfM8fuSDoCw

Give me the link for RepRapFirmware 2 plz

@Boull Did you watch my video?

@Boull I’m sending you another video tonight because I’ve seen soldering done wrong and places that the insulation on the card is like discoloring in many places. sorry.

@droftarts oK 12:06:31M115

With the original card this reponce and the same with my card, why RepRapFirmware 3 on the original card if it does not work with?

FIRMWARE_NAME: RepRapFirmware for Duet 2 WiFi/Ethernet FIRMWARE_VERSION: 3.0 ELECTRONICS: Duet WiFi 1.02 or later FIRMWARE_DATE: 2020-01-03b3
12:06:16Connection established!
12:06:16Page Load complete!

I am sending you another video tonight because I have seen soldering done badly and places that the insulation on the card is like discoloring in several places.

@droftarts said in Duet2 Wifi new a little problem.:

RepRapFirmware 2

Hello. On April 21, 2020, I purchased a Duet2 Wifi from Spool3D (Order # 200603992) Calgary. I notified Derek by Mail that I had a problem heating the bed and the hotten. I attach the video link as he asked me to explain the problem as best as possible. Regarding the configuration I used the configuration of Gueroloco (https://www.youtube.com/watch?v=tCRS9N7dYjc&t=676s) one can modify only for the speed of the home. (I already have another on another printer that works wonderfully)
Here is the You Tube link (https://www.youtube.com/watch?v=oPHPKv4wM6c&t=17s)
I post to the Duet3D forum to get approval for a warranty replacement according.

Thank you!
Have a good day.
Jeans

I found I tested with my other card and this new card is defective.

Hello! Last week I got a DUet2 wifi for my Ender3 Stuck, I configured on the web one can copy yours (duet Mistro and Goueroloco) for heating the bed and the heating head. Everything works well except that on the status machine (Heaters) Current it is N / A and the bed off (error) I have checked my connector and everything is fine, Here is my Comfig.g.

; Heaters
;M305 P0 T100000 B4138 R4700 ; set thermistor + ADC parameters for heater 0 - LIT
;M143 H0 S120 ; set temperature limit for heater 0 to 120C
;M305 P1 T100000 B4138 R4700 ; set thermistor + ADC parameters for heater 1 - HOTTEND
;M143 H1 S280 ; set temperature limit for heater 1 to 280C

;dom Mod and add for Gueroloco.
M307 H0 B0 S1.00 ; Disable bang-bang mode for the bed heater and set PWM limit
M305 P0 T107600 B4138 R4700 ; Set thermistor + ADC parameters for heater 0
M143 H0 S120 ; Set temperature limit for heater 0 to 120C
M305 P1 T104300 B4138 R4700 ; Set thermistor + ADC parameters for heater 1
M143 H1 S280 ; Set temperature limit for heater 1 to 280C