I think the emergency stop button should scroll with the page (always on the screen)

@dc42:

@Billhc83:

This is meant to be manually done once delta calibration is finished.

Jog the head to the bed until it just grabs a piece of regular paper. Send g92 z0 via pronterface or DWC. Upload and print. I only do this once when I start the machine.

It should not be necessary to set the height manually using G92, unless the Z probe is not giving consistent results.

I agree but I find lighting at different times of the day can affect the reading slightly. It is just easier for me to eliminate the variable. Although with the baby step function small variances are easily fixed now

This is meant to be manually done once delta calibration is finished.

Jog the head to the bed until it just grabs a piece of regular paper. Send g92 z0 via pronterface or DWC. Upload and print. I only do this once when I start the machine.

I pretty much always use autocalibration then use a piece paper to set my g92 z0 nozzle height. Perfect first layer every time but takes an extra minute when I start up. That way I don't have to worry about it after that.

Put it in a computer and drag and drop?

This is a bit exaggerated I have pulled the perimeters away from the object in the photo. I have no way of measuring the orifice of the nozzle, but there is a chance it is not 0.3 I suppose. I cut the wall off the object and it measures 0.3 with calipers, I have not changed extrusion multiplier settings. I would prefer to change other settings rather than the multiplier setting. I am thinking I should try a smaller nozzle width? At first glance of the objects you would not even see that they are separated but after running a finger across the perimeter you can feel that is is not fully adhered. I am using 220*C for PLA,

I am having trouble with my outside perimeter having a very small gap. It is not present in all prints. Of anyone has any tips it would be appreciated. I have tried multiple slicers with the same results. .3 nozzle with 3 perimeters. When the print finishes it looks perfect other than the outside perimeter is not always joined to the print.

I believe it is the c++ version you are after

I just meant for day to day printing i find that combination good. Sometimes models would be better suited with a bigger or smaller nozzle or a different layer height. I just meant I find it a good general purpose combination. I'm not trying to mass produce anything so I'm not to upset with the longer print times at 0.2 layer height.

I use 0.3 nozzle on my delta with a e3dv6
.2 layer height most of the time. I'm happy with it most of the time…