Hello,

I am looking for a controller to run an openbuilds C-BEAM machine, and am wondering about the potential to use a duet. I'm curious if the duet supports external drivers for motor movement, and if so, what firmware modifications would have to take place to make this happen. If this is possible, it would be very interesting to have a duet powered mill. The power system for the external drives would be 36V, so a step down would be necessary for the duet, if this is possible. Thanks!

the default profile in my sli3er config is .ngc because i started out with an absolutely ancient machinekit setup.

I have solved the problem. The .ngc file format needs to be a .gcode file format upon output. I just never thought this could be the issue. Thanks for your attention

http://bit.ly/2nPk5Mo here is a file that does as described

Hello,

I am running a duet wifi in a Core XY on firmware version 1.20. I have the file progress time estimation field populated, but the layer and filament fields are N/A. I don't know how to fix this, I have seen examples of it working and I cannot find the discrepancy between my non working setup and others working setups. I am running prusia slicer 1.39.1a, i have seen this function work in this version of slicer. Any insight anyone could give would be much appreciated. Thank you.