Hello
got this message"Error in start-up file macro line 5: in file macro line 5 column 17: M307: expected number after 'K'" " on startup after updating to 3.5.1.
I first thought it was a problem in config-override or config file but in my config ther is no M307 with K and this is my Config-override:
; config-override.g file generated in response to M500 at 2024-04-20 19:05
; This is a system-generated file - do not edit
M307 H0 R0.123 K0.236:0.000 D11.52 E1.35 S1.00 B0
M307 H1 R2.660 K0.303:0.000 D5.15 E1.35 S0.75 B0 V23.9
; Probed axis limits
M208 S0 Z359.81
; Z probe parameters
G31 K0 P25 X42.0 Y21.0 Z2.40
The Printer is working good but message on startup is boring.
Can someone tell me where i have to search for the M307 command?